Table of Contents
Advertisement
2.2 System requirement
Hardware
Item
Local host side
Remote Console side
Software
Item
Local host side
Remote Console side
2.3 When the server is up and running
The KVM IP Console Module gives you a full control over the remote server. The
Management Console allows you to access the remote server's graphics, keyboard and
mouse and to send special commands to the server. You can also perform periodic
maintenance of the server. Using the Console Redirection Service, you are able to do the
following:
I.
Reboot the system
II.
Watch the boot process.
III. Boot the system from a separate partition to load the diagnostic environment.
IV. Run special diagnostic programs.
2.4 When the server is dead
Obviously, fixing hardware defects is not possible through a remote management device.
Nevertheless KVM IP Console Module gives the administrator valuable information about
the type of a hardware failure. Serious hardware failures can be categorized into five
different categories with different chances to happen:
I.
Hard disk failure 50%
II.
Power cable detached, power supply failure 28%
III. CPU, Controller, main board failure 10%
IV. CPU fan failure 8%
V.
RAM failure 4%
KVM switch unit (KVM-0831, KVM-1631, KCM-0831,
KCM-1631)
One PC or Multiple PCs are linked into the network
No additional software necessary
(1) Java Runtime Environment : version 6 update 5 and above.
Linux JDK 1_5_0_18 and above
(2) Browser: ( IE7.0 , IE8.0, Netscape7.0, Mozilla 3.2,
Firefox 3.6) and above.
11 / 87
KVM IP Console Module
Description
Description
Advertisement
Table of Contents
