Compaq TFT5000 User Manual page 8

Rotating the Monitor Panel
The monitor panel can be rotated 90 degrees as shown below. This is
an added feature for use with software that displays portrait
dimensions on-screen instead of landscape dimensions. The Pivot
software package included on the Compaq CD-ROM should be
installed on the computer to accommodate matching screen rotation.
To rotate the monitor panel to portrait mode:
1. Raise the monitor panel to its highest height to avoid bumping the
panel on the desk.
2. Place your hand on the side of the monitor panel and turn the panel
clockwise.
To rotate the monitor panel back to landscape mode, rotate the monitor
panel counter-clockwise.
Installing the Pivot Software
To install the Pivot rotation software:
1. Insert the Compaq CD-ROM into the CD drive on your computer.
2. Using Microsoft Windows as your operating system, go to
Start Run
designating the CD-ROM drive) in the Open box and click OK.
1-6 English
and type x:\Pivot\Setup.exe (where x is the letter