Compaq TFT5000 User Manual page 5

Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then follow
these steps:
1. Place the monitor in a convenient, well-ventilated location near
your computer.
2. Connect the monitor signal cable
monitor to the 15-pin connector on the rear panel of the
computer and tighten the screws.
Be sure the signal cable aligns with the 15-pin connector.
Do not force the cable onto the connector or you may
damage the signal cable.
3. Connect one end of the AC power cord
the other end to an electrical outlet that is easily accessible and
close to the monitor.
CAUTION: When connecting the monitor, be sure to use the
AC adapter supplied with the monitor. Failure to use this
AC adapter may result in damage to the monitor.
on the rear panel of the
to the AC adapter and
English 1-3