Rack Stability - Compaq TFT 5000R User Manual

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from
the system.
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack, if it is a single rack
installation.
The racks are coupled in multiple rack installations.
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
Contents ix