Table of Contents
Advertisement
11. Fully extend the slide rails on the retractable tray assembly, then align
them with the mounting bracket rails. Slide the tray assembly into the
rack until it locks into place.
Figure 2-6. Inserting the retractable tray into the rack
12. Insert the retma rail covers over the front rails, aligning the holes with
the previously installed cage nuts. Secure each cover with one M6
screw.
Figure 2-7. Attaching the retma rail covers
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor 2-5
1
2
Advertisement
Table of Contents
