▲
2. Press the Up (
) or Down (
PHASE) icon and highlight it.
3. Press the Select (
associated numeric value for your adjustment onscreen.
▲
4. Press the Up (
) or Down (
0 to 100. The Up (
button will decrease it.
Tip:
If Auto Configuration does not produce a clear image, try adjusting the PHASE setting.
Performing Auto Setup in the OSD Menu
To perform auto adjustment in the OSD menu, follow the steps below:
1. Open the OSD Main Menu by pressing the Select (
▲
2. Press the Up (
) or Down (
highlight it.
3. Press the Select (
and start the auto adjustment function.
After the auto adjustment is complete, the OSD will close.
Configuring Colors
To configure the color settings for your preference, follows the steps below:
1. Open the OSD Main Menu by pressing the Select (
▼
) buttons to move forward or backward to the CLOCK (or
) button to select it. This will open the CLOCK (or PHASE) bar with the
▼
) buttons to adjust its value. The range for adjustment is from
▲
) button will increase the numeric value of the setting and the Down (
▼
) buttons to move forward or backward to the AUTO icon and
) button to select it. This will open the AUTO SETUP submenu
) button.
) button.
15
▼
)