Advertisement
Quick Links
Installation, Operation and Maintenance Manual
IMPORTANT
Please take a moment to review this manual. Before performing any maintenance on the valve be sure the pipeline has been de-pressurized. The
improper installation or use of this product may result in personal injury, product failure, or reduced product life. Tideflex
resulting from the improper use or installation of this product. If you have any questions or problems, please call the customer service department
at (412) 279-0044. We appreciate your comments. Thank you for choosing Tideflex
Series 35 / Series 35-1 Check Valves
The revolutionary design of the Series 35/35-1 Check Valve
provides absolute backflow protection. This unique "duck bill"
design eliminates costly backflow from oceans, rivers or storm
water and is the ideal valve for effluent diffuser systems.
Series 35/35-1 Check Valves seal "drop tight" on entrapped
solids and debris without jamming. Unlike traditional flap gates
there are no hinged gates to hang open and no warping or
freezing. They're maintenance–free.
The Series 35/35-1 Check Valve is available in a wide variety
of elastomers and is designed to meet your exact flow
specifications.
.
®
IOM RV09.02-1
February 2023
can accept NO liability
®
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Red Valve Tideflex 35 Series
Summary of Contents for Red Valve Tideflex 35 Series
- Page 1 IOM RV09.02-1 February 2023 Series 35 / Series 35-1 Check Valves Installation, Operation and Maintenance Manual The revolutionary design of the Series 35/35-1 Check Valve provides absolute backflow protection. This unique "duck bill" design eliminates costly backflow from oceans, rivers or storm water and is the ideal valve for effluent diffuser systems.
- Page 2 MAINTENANCE The Series 35/35-1 Check Valve should remain trouble free for the life of the system. Red Valve • 750 Holiday Drive, Suite 400, Pittsburgh, PA 15220 • 412-279-0044 • support@redvalve.com • RedValve.com © 2023 Red Valve Company...
- Page 3 Limited Warranty Red Valve Company (“Seller”) manufactured products, auxiliaries and parts thereof that we manufacture for a period of twenty-four (24) months from date of shipment from Seller’s factory, are warranted to the original purchaser only against defective workmanship and material, but only if properly stored, installed, operated, and serviced in accordance with Seller’s recommendations and instructions.
Need help?
Do you have a question about the Tideflex 35 Series and is the answer not in the manual?
Questions and answers