Installing The Mcu600 (Main Control Unit) - NorthStar NS3300 AutoPilot Installation Manual

3-3 Installing the MCU600 (Main Control Unit)

IMPORTANT: 60 mm (2.36") clear-
ance required for cables
Installation
Find a suitable location for the unit:
Mount the unit with the cable connectors at the bottom or to one side, using the screws provided.
Do not mount the unit with the connectors at the top, because dust or moisture might enter the unit.
Reference Manual
In a dry, cool place; if possible not the engine room.
Close to the high-current power supply and the steering drive, to reduce the length of the high
current wiring.
Accessible for installation and service.
If possible on a vertical panel which does not vibrate.
Follow the location guide (see section 3-2-1).
IMPORTANT: 200 mm (7.87") clearance
required for cover removal
11