Installing The Gyro - NorthStar NS3300 AutoPilot Installation Manual

3-7 Installing the Gyro

22
Physical
101 mm, (4")
Mounting holes
for screws
10 m (32.8 ft)
LT8 connector
Location
Mount the gyro as close as possible to the centre of movement of the boat, to
minimize how much the gyro moves when the boat rocks and pitches.
Mount the gyro on a panel which does not vibrate.
The unit is completely waterproof but should not be immersed. Follow the
location guide (see section 3-2-1).
The Ideal location is at the centre of movement (for planing hulls, the centre of
movement is usually close to the stern).
71 mm, (2.8")
97 mm,
(3.8")
Northstar NS3300 Pilot System Intallation