Technical Data; Disposal - Batavia FIXXPACK 12 V BT-CP002 Operating Instructions Manual

English

10. Technical data

Speed . . . . . . . . . . 0-2600/0-7800 min
Pad size . . . . . . . . . . . . . . . . Ø 75mm
Drive spindle thread . . . . . . . . . . . . .M6
Weight. . . . . . . . . . . . . . . . . . 0.67 kg
Sound Pressure Level L
Uncertainty K . . . . . . . . . . . . . . . 3 dB
pA
Sound Power Level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand Arm Vibration
Main handle . . . . . . . . . . . . 4.700 m/s²
Uncertainty K. . . . . . . . . . . . . .1.5 m/s
Auxiliary handle . . . . . . . . . . 3.334 m/s
Uncertainty K. . . . . . . . . . . . . .1.5 m/s
Noise/Vibration information
10.1
Measured sound values determined accord-
ing to EN 60745.
Wear hearing protection!
Vibration total values (triax vector sum)
determined according to EN 60745:
The vibration emission level given in this
information sheet has been measured in
accordance with a standardized test given
in EN 60745 and may be used to compare
one tool with another.
It may be used for a preliminary assess-
ment of exposure.
The declared vibration emission level repre-
sents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may significantly increase
the exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account the
times when the tool is switched off or when
it is running but not actually doing the job.
This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to pro-
tect the operator from the effects of vibra-
tion such as: maintain the tool and the
accessories, keep the hands warm, organi-
sation of work patterns.
Vibration risk limitation suggestions:
1) Wear gloves during operation
8
. . . . . 80 dB(A)
pA
. . . . . . . 91 dB(A)
WA
2) Limit operating time and shorten trigger
time.
-1

11. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
2
als and plastics. Take defective compo-
2
nents to a special refuse collection point.
2
Ask about these at your specialist shop or
local council. The product and the user
manual may be subject to changes. Techni-
cal data may be changed without prior
notice.
Batteries
11.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of
explosion.