Table of Contents
Advertisement
(2) Enter the user name and the password in the login screen, and click [Login]. A setting screen will appear.
The table below shows the default user names, passwords, and functions that are available for maintenance
users and building managers.
User
Maintenance
initial
user
Building
administrator
manager
Note: A building manager will use the same user name and password for the Web Browser for System Maintenance Engineer.
Note: A maintenance user can specify the functions to be made available for building managers. Refer to chapter 8 "User
Settings" for details.
Note: It is recommended to change the default user name and password so that the users other than the maintenance users
and building managers will not be able to change the settings.
Note: When one or more AE-50 controllers are connected, log in to all AE-200 and AE-50 Web browsers to make initial
settings for AE-200 and AE-50 respectively. The Web browser cannot be switched between the AE-200 and the AE-50.
WT07138X01
Default
Default
user name
password
init
admin
Available functions
Date and Time, Basic System, Groups,
Initial Settings
Interlocked LOSSNAY, Blocks
E-Mail, Peak Cut, Measurement,
Functions 1
Energy Management Settings
Set Temperature Range Limit,
Functions 2
Night Mode Schedule, System-changeover
External Temperature Interlock,
Functions 3
Night Setback Control, Interlock control,
AHC Port Name Settings
User Settings
User Settings
Utility
Back up/import settings data
Out of the functions listed above, the items to which access rights
have been given on the User Settings screen are available.
9
Advertisement
Table of Contents
