Mounting the Switch
Align the chassis and slide both front and rear center brackets together.
2
Place bracket plate over front and rear brackets and secure with thumb screws.
3
Attach rack mount brackets to both sides of the front of the chassis.
4
Using one additional person, lift and position the assembly on the rack until the rack-mount flanges are
5
flush with the rack post.
page 3-14
Slide Chassis Together
Secure Front and Back with Bracket Plate
Attach Rack Mount Brackets
OmniSwitch 6570M Hardware Users Guide
Chassis and Power Supplies
Slide chassis together
Bracket Plate and Screws
December 2022