Login-Service (15) - Bay Networks RADIUS Reference Manual

Login-Service (15)

Specifies the terminal service protocol used for a login connection.
Usage: This attribute is used only when Service-Type (6) is Login [1].
Terminal service to the specified host is started immediately after the user
dials in.
Valid values are:
• Telnet [0]
• Rlogin [1]
• LAT [4]
If Service-Type (6) is Login [1] and this attribute is omitted, the RAC
places the user at the CLI.
Multiple Instances Allowed: No.
Dependencies: The RAC ignores this attribute if Service-Type (6) is
anything other than Login [1]. The attribute value is handled as follows:
If the value is Telnet [0] or Rlogin [1], the Login-IP-Host (14)
•
attribute must be specified. If it is not, the RAC prompts the user
for a target host.
• If the value is LAT [4], the Login-LAT-Node (35) attribute
must be specified. If it is not, the RAC prompts the user for a
target host.
RADIUS Attributes Reference
RADIUS Attributes
15