Remote Programming Steps; Program New Remotes To Receiver; Program New Remotes To Ata Receiver - Chamberlain MC100AML Programming Steps

Whilst every effort has been made to ensure the accuracy of the information supplied herein, we assume no liability for any errors or omissions. Information

Remote Programming Steps

Program New Remotes to Receiver

1. Start with your garage door closed. Ensure that the door is clear
of all obstructions.
2. Press and hold the bottom button on the remote control until
the blue LED on the remote stays solid (approximately 15
seconds), then release the button.
3. Press and hold the LEARN button on your garage door opener
for 2-3 seconds before releasing it
4. On the remote control, press and release the remote button
you would like to program. The blue LED will blink for up to 60
seconds. Once the LED changes to solid blue, press & release
the button on the remote that you are programming.
5. The remote will begin flashing once every three seconds. Once
the door begins moving press the remote button again. Your
remote is now programmed to the garage door opener.
6. Repeat process for additional remotes if necessary

Program New Remotes to ATA Receiver

1. Start with your garage door closed. Ensure that the door is clear
of all obstructions.
2. Press and hold the bottom button on the remote control until
the blue LED on the remote stays solid (approximately 15
seconds), then release the button.
3. Press and hold the CODE SET button on the opener until the
completion of the next step
4. On the remote, press and release the remote button that you
would like to program. The blue LED on the remote will blink for
up to 60 seconds. Once the remote LED changes to solid blue,
release CODE SET button on the opener and press & release the
remote button you are programming.
5. The remote will begin flashing once every three seconds. Once
the door begins moving press the remote button again. Your
remote is now programmed to the garage door.
6. Repeat process for additional remotes if necessary
contained in this document is subject to change without prior notice.