Download
Share
Print this page
Chamberlain MC100AMLR Manual
  1. Manuals
  2. Brands
  3. Chamberlain Manuals
  4. Remote Control
  5. MC100AMLR
  6. Manual

Chamberlain MC100AMLR Manual

Universal garage door opener remote control
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
MC100AML
UNIVERSAL GARAGE DOOR OPENER
REMOTE CONTROL
The Universal Garage Door Opener Remote
Control can be programmed to operate up to two
motors. Each button on the remote control works
independently of the other and must be
programmed separately.
The images throughout this manual are for
reference only and your product may differ from
the images shown.

Advertisement

loading

Related Manuals for Chamberlain MC100AMLR

Summary of Contents for Chamberlain MC100AMLR

  • Page 1 MC100AML UNIVERSAL GARAGE DOOR OPENER REMOTE CONTROL The Universal Garage Door Opener Remote Control can be programmed to operate up to two motors. Each button on the remote control works independently of the other and must be programmed separately. The images throughout this manual are for reference only and your product may differ from the images shown.
  • Page 2 To prevent possible SERIOUS INJURY or DEATH from a moving door: • ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play with remote control transmitters. • Activate a door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions.
  • Page 3 EASYLIFTER R, CAD P DIAMOND, CAD P DIAMOND WQ, CAD P DIAMOND PD Boss Fixed 433.92MHz RADIO RD 11, BOL6 (433MHz Variant) Chamberlain Security +2.0 433.30 / 433.92 / LEARN or RollerLift, RollerLift Plus, HandyLift Plus 2.0, 434.54MHz “S” HandyLift Deluxe 2.0, HandyLift MyQ,...

  • Page 4: Programming Tips

    Roller Door Openers Learn Button PROGRAMMING TIPS NOTE: When programming a Merlin or Chamberlain Security+2.0 opener follow the below steps: 1. Press & release the LEARN button on the opener. 2. Press & release the remote button you wish to program. The code has been learnt and the next press of the remote button should activate the door.

  • Page 5: Programming The Remote

    PROGRAMMING THE REMOTE In order to program the Universal Remote, the LEARN button on the garage door opener must be located. Please refere to page 3 as well as the compatibility table on page 2 for the lean button label used for various brands.
  • Page 6 ATA BRANDED OPENERS These programming instructions are for ATA branded garage door openers. Read through all steps before commencing, and become familiar with the control buttons. Once the programming sequence has commenced its important to continue from one step to another reasonably quickly. Time between some steps is critical.

  • Page 7: Frequently Asked Questions

    FREQUENTLY ASKED QUESTIONS How do I program the other button on the Universal Remote Control? After pressing the LEARN button on the motor, go through the same programming method using the other button. This process will not over write the first button. The initial 15 second press to put the remote into learn mode must be performed using the bottom button.
  • Page 8 1 year from the date of purchase. The benefits given to you under this Chamberlain Limited Warranty are in addition to any rights and remedies that you may have under Australian or New Zealand consumer protection laws.