Download Print this page
Sony PlayStation CFI-ZSS1 Instruction Manual

Sony PlayStation CFI-ZSS1 Instruction Manual

For playstation vr2 sense

Advertisement

Available languages

Available languages

Quick Links

PlayStation VR2 Sense™
Controller Charging Station / ‫وحدة شحن وحدة التحكم‬
Instruction Manual / ‫دليل اإلرشادات‬
CFI-ZSS1
EN
Health and Safety
Before using this product, carefully read this manual and any
manuals for compatible hardware. Retain instructions for future
reference. Parents or guardians of children should read this
manual for safe use.
This product has been designed with the highest concern for
safety. However, any electrical device, if used improperly, has the
potential for causing fire, electrical shock or personal injury.
Observe all warnings, precautions, and instructions. Stop use and
disconnect the AC power cord immediately if the product
functions in an abnormal manner, produces unusual sounds or
smells or becomes too hot to touch.
Warning
YOUNG CHILDREN INJURIES
CHOKING HAZARD – Small parts. Keep the product out of the
reach of young children. Young children may swallow small parts
or may wrap the cables around themselves, which may inflict
injury or cause an accident or a malfunction.
NEVER DISASSEMBLE OR MODIFY THE PRODUCT OR
ACCESSORIES
There is a risk of fire, electric shock, or injury.
MAGNETS AND MEDICAL DEVICES
This product has magnets which may interfere with pacemakers,
defibrillators and programmable shunt valves or other medical
devices. Do not place this product close to such medical devices
or persons who use such medical devices. Consult your doctor
before using this product if you use such medical devices.
Precautions
AC adaptor and AC power cord
Only use the AC adaptor, charging adaptor and AC power cord
ˎ
included with the product. The AC adaptor and AC power cord
are designed specifically for use with this product only, and the
charging adaptor is for the PlayStation VR2 Sense™ controller
only. Do not use them with any other products.
Do not connect the AC power cord to a voltage transformer or
ˎ
inverter. Connecting the cord to a voltage transformer for
overseas travel or an inverter for use in a vehicle may cause it to
heat up in the AC adaptor and may cause burns or a
malfunction.
Unplug the cord and cables if you want to clean or move the
ˎ
product or do not intend to use it for an extended period of
time. When disconnecting, hold the cord by the plug and pull
straight out of the socket. Never pull by the cord and do not pull
out at an angle.
Liquid, dust, smoke, steam, and heat
Always ensure the product and its connectors are free of liquid,
ˎ
excess dust and small particles.
Do not leave the product in the following areas during use,
ˎ
storage, or transportation.
Areas exposed to smoke or steam
ˋ
Areas with high humidity, dust, or cigarette smoke
ˋ
Areas near heating appliances, areas exposed to direct
ˋ
sunlight, or areas that retain heat
Set up and handling
Do not use the cords if they are damaged or modified.
ˎ
Do not place heavy items on the product, adaptor or cord, throw
ˎ
or drop the product, or otherwise expose it to strong physical
impact.
Do not place the product on surfaces that are unstable, tilted, or
ˎ
subject to vibration.
Do not leave the product on the floor.
ˎ
Do not walk on the cord or cables or pinch them, particularly at
ˎ
plugs, receptacles, connectors and where they exit from the
product.
Do not pull or bend the cord with excessive force.
ˎ
Do not touch the plugs, connectors or insert any foreign objects
ˎ
into them or the product.
Arrange the cables carefully to avoid tripping over them.
ˎ
Do not swing the product or adaptor around by their cord.
ˎ
Do not expose the product, battery, or accessories to high
ˎ
temperatures, high humidity, or direct sunlight during operation,
transportation, and storage.
Use and handling
Never disassemble or modify the product or
accessories
Use the product and accessories according to the instructions in
this manual. No authorisation for the analysis or modification of
the product, or the analysis and use of its circuit configurations, is
provided. Unauthorised modification of the product will void your
manufacturer's guarantee.
5-048-739-21(1)
Care and cleaning
Follow the precautions below to help prevent the product exterior
from deteriorating or discolouring.
Do not apply volatile substances such as insecticide.
ˎ
Do not allow rubber or vinyl materials to be in prolonged
ˎ
contact with the product.
Do not use thinner, benzine, or alcohol. Avoid using wipes,
ˎ
chemically-treated cloths, and other products that contain such
substances.
Wipe with a soft, dry cloth.
ˎ
Charging
1
Connect the supplied AC power cord to the supplied
AC adaptor. Then, connect the AC adaptor to the DC IN
connector on the charging station.
Make all connections before plugging the AC power cord into
an electrical outlet.
DC IN connector
To an electrical
outlet
AC power cord
AC adaptor
2
Attach the charging adaptors to the PlayStation VR2
Sense™ controller.
The left and right charging adaptors are interchangeable.
3
Attach each of the controllers to the charging station.
With the charging adaptors attached, insert each controller
into the charging station's connector. The controller's status
indicator will slowly blink white and turn off when charging is
complete.
Do not use the controllers while charging.
ˎ
The charging station can charge a right and left
ˎ
controller at the same time.
To remove the controller
Lift the controller out of the charging station to remove it.
You can still use the controller while the charging adaptor is
attached.
Charging time
It takes approximately 1.5 hours to charge the controllers when
the battery has no remaining charge.
Specifications
Ratings: Charging Station
input 5.1 V
Ratings: AC adaptor
input 100-240 V
0.4 A
50/60 Hz
output 5.1 V
2.8 A
External dimensions (w × h × d)
Approx. 241 × 59 × 135 mm
Mass
Approx. 391 g
Operating temperature
5 °C to 35 °C
Country of production
China
Design and specifications are subject to change without notice.
Compliance Information
This product has been manufactured by or on behalf of Sony
Interactive Entertainment Inc., 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan.
Imported into the United Kingdom and distributed by Sony
Interactive Entertainment Europe Limited, 10 Great Marlborough
Street, London, W1F 7LP, United Kingdom.
Inquiries related to product compliance in the UK should be sent
to the manufacturer's authorised representative, Sony Europe B.V.,
The Heights, Brooklands, Weybridge, Surrey KT13 0XW, United
Kingdom.
Imported into Europe and distributed by (except the UK) Sony
Interactive Entertainment Ireland Limited, 2nd Floor, 2/3 Rogers
Lane, Dublin 2, Ireland.
Inquiries related to product compliance in the EU should be sent
to the manufacturer's authorised representative, Sony Belgium,
bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930
Zaventem, Belgium.
NOTICE FOR CUSTOMERS IN THE UNITED
KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment
for your safety and convenience. Should the fuse in the plug
supplied need to be replaced, a 5AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
or
mark) must be used. If
the plug supplied with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after you change the fuse.
Never use the plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony service station.
Product Ecodesign
For customers in EU
For information based on the EU Ecodesign requirements of the
Regulation (EU) No 2019/1782 visit the following URL:playstation.
com/ecodesign
For customers in UK
For information based on the Ecodesign for Energy-Related
Products and Energy Information (amendment) (EU Exit)
Regulations 2020 visit the following URL:playstation.com/
ecodesign
For customers in the EU, UK and Turkey
Where you see this symbol on any of our electrical products or
packaging, it indicates that the relevant electrical product should not
be disposed of as general household waste in the EU, UK, Turkey, or
other countries with separate waste collection systems available. To
ensure correct waste treatment, please dispose of them via an
authorised collection facility, in accordance with any applicable laws or
requirements. Waste electrical products may also be disposed of free of
charge via retailers when buying a new product of the same type.
Furthermore, within the UK and EU countries larger retailers may accept
small waste electronic products free of charge. Please ask your local
retailer if this service is available for the products you wish to dispose
of. In so doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of
electrical waste.
GUARANTEE
This product is covered for 12 months from date of purchase by
the manufacturer's guarantee. Please refer to the guarantee
supplied in the PlayStation®5 package for full details.

Advertisement

loading

Summary of Contents for Sony PlayStation CFI-ZSS1

  • Page 1 5 °C to 35 °C Country of production China Design and specifications are subject to change without notice. Compliance Information This product has been manufactured by or on behalf of Sony Interactive Entertainment Inc., 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. CFI-ZSS1 5-048-739-21(1)
  • Page 2 .‫للحصول على التفاصيل الكاملة‬ ‫امتنع نهائي ً ا عن تفكيك المنتج أو الملحقات أو إجراء أي‬ ‫تم تصنيع هذا المنتج بواسطة أو بالنيابة عن شركة‬ Sony Interactive Entertainment Inc., 1-7-1 Konan Minato-ku Tokyo, ‫تعديل على أي ٍ منها‬ .108-0075 Japan ‫استخدم...