Synchronizing Clock; Viewing Clock; Sleep - Philips WAC3500 User Manual

Helpful hints:
To change to 12-hour or 24-hour format
– In the Time menu, select Time Format (see
the above Step 2)
– Press 3 or 4 and 2 to select your option.
– The clock setting will not be saved when the
set is disconnected from the power supply.

5.9.2 Synchronizing clock

1
In the Time menu, select Auto Time Sync
➜
The display shows the preset radio stations
2
Use the navigation controls 3 or 4 and 2 to
select an RDS radio station to synchronize the
time.
5. Basic functions

5.9.3 Viewing clock

Press and hold VIEW button for about 5
seconds.
➜
Clock will be shown briefly on the display.
Helpful hint:
– In standby mode, you may press VIEW button
briefly to turn on the LCD backlight so as to
view clock clearly.
– Reset clock if the power cord is plugged in
again.

5.10 SLEEP

You can preset a certain period of time after
which the Center will switch to standby mode.
1
On the remote control, press SLEEP repeat-
edly to select the desired time period (in min-
utes):
➜
The display shows in sequence: Sleep 15,
30, 45, 60, 90, 120, Off.
➜
Display shows the selected option briefly
and returns to its previous status.The icon
Z Z appears.
2
To view the countdown time to standby mode,
press SLEEP again
●
To deactivate the sleep timer, press SLEEP
repeatedly until Sleep Off is displayed
●
Press STANDBY-ON/ ECO POWER to
switch the set to standby (or press y on the
remote control)
27