Table of Contents
Advertisement
"Danger" or "Warning" are strictly used for cases which present a risk to life or limb.
Damage to property only falls into these categories if there is also a risk of personal
injury that corresponds to these levels.
Selecting
personnel and
qualifications
Wieland Electric GmbH | BA000628 (Rev.A) | 04/2009
"Notice" indicates information that is directly or indirectly related to the safety
of personnel or property. It is not directly associated with hazards or hazardous
situations.
1.5 Intended use
gesis
The
motor starter is an AS-i device on an energy bus for the connection and
protection of three-phase asynchronous motors.
Energy bus systems have been constructed using state-of-the-art-
technology and according to recognized safety regulations. However, when in
use they may still present risks to the life and limb of the user or third parties,
and the possibility of damage to machines, systems or other property.
The energy bus system must only be used when in proper working
condition, as well as according to its prescribed usage, with due regard given to
safety, awareness of any hazards and following the instructions contained in
the operating manual. Reliable and safe control operation implies proper
shipping, storage and installation, as well as careful operation.
Especially, failures that can affect safety are to be immediately corrected. In
order to use the automation systems as prescribed, the instructions outlined in
this operating manual must be followed for mechanical and electrical
installation procedures, as well as for activation and operation of the systems.
Never install damaged products and do not use them. Please contact the
transport company about any damages. During operation, plug connections are
not to be loosened or plugged into connected consumers.
During the projection, installation and implementation of energy bus systems
in line with machine supply and their control systems, the machine
manufacturer and user must therefore observe the safety regulations set out by
Machinery Directive 89/392/ EEC. National accident prevention regulations
apply in specific cases of operation. Observe applicable safety and accident
prevention regulations, e.g. machine protection guidelines, for respective cases
of operation. All safety devices on the controlled machine must be arranged in
such a way that they function independently of the controller. In all types of
system operations, EMERGENCY STOP equipment must remain operative
according to IEC 60204 (accord. to DIN VDE 113). In the event of an
EMERGENCY OFF, supply voltages must be disconnected from all equipment
that is controlled by the controller.
The motor starter is exclusively intended for automation applications in
industrial installations and machines. Other applications or use beyond this
scope is considered to be improper. The manufacturer assumes no
responsibility for any damage resulting from usage of this nature.
In order to use the automation systems as prescribed, the instructions
outlined in this operating manual must be followed for mechanical and
electrical installation procedures, as well as for activation and operation of the
systems.
All projection, program, installation, implementation, operation and
maintenance work in connection with
executed by qualified personnel (e.g. skilled electrical workers, electrical
engineers). Configuring and programming
2 | Device description
NOTE
podis
electronic products may only be
7
Advertisement
Table of Contents
