Charging The Devices - Rapsodo PITCHING 2.0 User Manual

Charging the devices

Charging the Monitor
The battery can be charged by connecting the included Micro-USB cable into the
port on the rear monitor panel.
The rear LED will show
The rear LED will switch off indicating the device has been sufficiently charged.
The LED indication will
battery should be charged.
Charging the RCE
The battery can be charged by connecting the included USB-C cable
to the USB-C charging port. (located on the side of the power button)
The power LED will show
The power LED will switch off indicating the device has been sufficiently charged.
The LED indication will
the battery should be charged.
NOTE:
The monitor and RCE must be charged separately to ensure a complete charge for each device.
8
AMBER indicating the monitor is charging.
FLASH RED indicating the battery charge is getting low and the
AMBER indicating the monitor is charging.
FLASH RED indicating the battery charge is getting low and