IOGear GKM562R - Compact 2.4GHz Multimedia Keyboard With Touch Pad Quick Start

Package Contents

1 x Compact 2.4GHz Multimedia Keyboard
1 x USB Receiver
1 x Quick Start Guide
1 x Warranty Card

Requirements

Computer/Device*

• PC with USB port
• Smart TV or gaming console

Operating System

• Windows^® 7, Windows^® 8.1, Windows^® 10
• Mac^® OS X v10.3.9 or later
• Linux (Debian 3.1, Redhat 9.0, Ubuntu 8.10, Fedora 7.9)
• Android OS (with standard USB interface)

*Device must support USB HID in order for USB HID-compliant keyboards and mice to function correctly

Overview

Front View

1. Left Mouse Click
2. Launch Media Player
3. Previous Track
4. Play/Pause
5. Next Track
6. Caps Lock Indicator
7. Battery Charging Indicator
8. Wireless Connection Indicator
9. Low Battery Indicator
10. Touch Pad

Side View

1. On/Off Power Switch
   

Back View

1. USB Compartment
   

USB Receiver

1. USB Connection
   

Installation

1. Make sure the GKM562R On/Off Power Switch is set to OFF.
2. Open the USB compartment cover on the rear side of the GKM562R.
3. Remove the USB receiver from the USB compartment.
4. Plug the USB receiver into an available USB port on your PC, Smart TV or Android device. Drivers will begin to install automatically.
5. Slide the GKM562R On/Off Power Switch to the ON position.
6. Wireless Connection Indicator will light solid blue when connection is successful. GKM562R is now ready for use.
7. If GKM562R does not connect, the battery may be running low and may require recharging the unit.

Pairing (if necessary)

1. With the keyboard powered off, press and hold the Esc button.
2. Power on the device and release the Esc button. Wireless Connection Indicator will blink rapidly.
3. Insert the USB receiver and wait approximately 5-10 seconds. Wireless Connection Indicator will light solid to indicate pairing procedure is complete.

Track Pad

Simply drag your fingers across the surface to activate and move the cursor on-screen.

Scroll the page up/down by dragging two fingers up/down.

Press bottom left of touch pad with one finger for left mouse click.

Press anywhere on the touch pad with two fingers for right mouse click and to open up menu.

Charging

1. When GKM562R battery level falls under 3.4V and requires charging, the Low Battery LED will light up.
   
2. Open the USB compartment cover on the rear side of the GKM562R.
3. Remove the USB connector end of the attached USB cable.
4. Connect the USB connector to an open USB charging port.
5. Battery LED lights up during charging and turns off when charging is complete.

Sleep Mode

The GKM562R supports auto sleep to save power and lengthen standby time. If there is no operation within 3 minutes, the GKM562R enters sleep mode automatically and all indicators will turn OFF. To invoke GKM562R, press any key and the GKM562R will resume its previous status.

Note: Using the touch pad will not wake the GKM562R from sleep mode

Energy Safe: To save power, switch the GKM562R power to OFF after use.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download IOGear GKM562R - Compact 2.4GHz Multimedia Keyboard With Touch Pad Quick Start