After-Sale Service - Seiko CREDOR 7R06 Operating Instructions Manual

Hour repeating function and silent function
The two functions can be used by operating the button located at the 8 o'clock position.
To use the hour repeating function
Firmly push the button to the second click
and release.
The hour repeating function is now
activated.
To use the silent function
Press the button halfway down to the first
click.
Doing this can activate the silent function so
that chiming can be muted as long as the
button is pressed.
Hour repeating function
The hour repeating function lets you know the current hour(s) by chiming the number of hours.
○ The number of hours that the watch chimes changes at 50 minutes every hour.
【Ex.】 The watch chimes twice if you activate this function between 1:50 and 2:50.
* The hour repeating function can be activated at anytime you press the button located at
the 8 o'clock position, regardless of the hour striking mode.
Silent function
The silent function can immediately prevent the chime from sounding as long as the button
is pressed halfway down to the first click, which controls the movement of the hammer.
○ Keep pressing the button halfway down until the chime stops.
○ The hammer movement passes through the button, so that you will easily recognize by
finger feel when the chime finishes. Also, you will know when the chime finishes by viewing
the movement of the gears near the hammer and slow governor.
○ Release the button when the chime finishes.
Hammer
Button
16 HOW TO USE How to use
Slow
governor
■ TO PRESERVE THE QUALITY OF YOUR
WATCH

After-sale service

Notes on guarantee and repair
○ Contact the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE
CENTER for repair or overhaul.
○ Within the guarantee period, present the certificate of guarantee to receive repair services.
○ Guarantee coverage is provided in the certificate of guarantee. Read carefully and retain
it.
○ For repair services after the guarantee period has expired, if the functions of the watch can
be restored by repair work, we will undertake repair services upon request and payment.
Replacement parts
○ Please keep in mind that if original parts are not available, they may be replaced with
substitutes whose outward appearance may differ from the originals.
Inspection and adjustment by disassembly and
cleaning (overhaul)
○ Periodic inspection and adjustment by disassembly and cleaning (overhaul) is
recommended approximately once every 2 years in order to maintain optimal performance
of the watch for a long time.
○ The movement of this watch comprises over 600 individual parts. To ensure that this
mechanism works properly all the time, washing parts, changing oil, adjusting accuracy,
checking functions and replacing consumable parts on a regular basis are important. The
first overhaul after the purchase of your watch is particularly important for preserving long-
time use of your watch. According to use conditions, the oil retaining condition of your watch
mechanical parts may deteriorate, abrasion of the parts may occur due to contamination
of oil, which may ultimately lead the watch itself to stop.
Please contact the retailer from whom the watch was purchased for inspection and
adjustment by disassembly and cleaning (overhaul). For replacement of parts, please
specify "SEIKO GENUINE PARTS". When asking for inspection and adjustment by
disassembly and cleaning (overhaul), make sure that the gasket and push pin are also
replaced with new ones.
TO PRESERVE THE QUALITY OF YOUR WATCH 17