Dometic FreshJet 4 Series Operating Manual page 13

Dometic FreshJet Series 4, FreshJet Series 7
Press the button of the remote control or the
speed.
The roof air conditioner confirms the receipt of the values with a beep sound.
The new fan speed is set.
9.3.5 Setting the temperature
In the Automatic ( ), Cooling (
between 16 °C and 31 °C.
Use the + or – button on the remote control to set the desired temperature.
The roof air conditioner confirms the receipt of the values with a high note. The temperature is set on the roof air
conditioner.
9.3.6 Setting the current time
The remote control needs the current time in order to program the timer. The time is shown on the remote control
display.
1.
Press and hold the
The time flashes on the remote control display.
2. Use the + or – button to set the current time. Press and hold the + or – button longer than 2 s to increase or de-
crease the time quicker.
3. Press the SET button to confirm the time.
9.3.7 Setting the timer
The timer function allows you to set a specific time period for air conditioning. You can specify the switch-on time,
the switch-to-standby time or both values.
The timer function is set via remote control.
Note The remote control returns to its initial mode if no button is pressed on the remote control for 15 s
while programming the timer.
Set the switch-on timer as follows:
a) Select the desired air conditioning mode and all required values (for example the temperature).
b) If necessary, switch the roof air conditioner to standby.
The switch-on timer can only be set when the roof air conditioner is in standby.
c) Press the
button one time.
The symbol flashes on the remote control display.
d) Use the + or – button to set the time when the roof air conditioner shall be switched on.
e) Press the
button.
The switch-on timer is set. The roof air conditioner will be switched on with the selected air
conditioning mode at the specified time.
), Heating ( ) and Dehumidifying (
button in order to get into the mode for setting the time.
button of the control panel to select the desired fan
) modes, you can specify a temperature
EN
13