Table of Contents
Advertisement
General Information
Case Description:
This Booklet specifically covers the
Following models:
Mobile Produce
Description: Mobile Produce Case model series are Multi‐deck, spot merchandisers designed for non‐critical
temperature applications such as: Non Hazardous Produce. They are available as self‐contained models as well
as a remote option. Each self‐contained model will have it's own condensing unit, factory installed beneath the
display area of the case ready for operation when electrical service is connected.
Shipping Damage: All equipment should be thoroughly examined for shipping damage before and during
unloading. This equipment has been carefully inspected at our factory and the carrier has assumed
responsibility for safe arrival. If damaged, either apparent or concealed, claim must be made to the carrier.
Apparent Loss or Damage: If there is an obvious loss or damage, it must be noted on the freight bill or express
receipt and signed by the carrier's agent; otherwise, carrier may refuse claim. The carrier will supply necessary
claim forms.
Concealed Loss or Damage: When loss or damage is not apparent until after all equipment is uncrated, a claim
for concealed damage is made. Make request in writing to carrier for inspection within 15 days, and retain all
packaging. The carrier will supply inspection report and required claim forms.
Location/Store Conditions: The refrigerated merchandisers have been designed for use only in air conditioned
stores where temperature and humidity are maintained either
air conditioning, electric fans, ovens, open doors or windows (etc.) to create air currents around the
merchandiser, as this will impair its correct operation.
Shortages: Check your shipment for any possible shortages of material. If a shortage should exist and is found
to be the responsibility of Hussmann Chino, notify Hussmann Chino. If such a shortage involves the carrier,
notify the carrier immediately, and request an inspection. Hussmann Chino will acknowledge shortages within
ten days from receipt of equipment.
Hussmann Chino Product Control: The serial number and shipping date of all equipment has been recorded
in Hussmann's files for warranty and replacement part purposes. All correspondence pertaining to warranty
or parts ordering must include the serial number of each piece of equipment involved, in order to provide the
customer with the correct parts.
Keep this booklet with the case at all times for future reference.
A publication of HUSSMANN
13770 Ramona Avenue • Chino, California 91710
(909) 628-8942 FAX
(909) 590-4910
(800) 395-9229
MPC
/CHINO
Chino
®
75°F ambient and 55% RH
This equipment is to be installed
to comply with the applicable
NEC, Federal, State ,and Local
ATTENTION
Plumbing
INSTALLER
Code
3
. DO NOT allow
and Construction
ha ving
jurisdiction.
Advertisement
Table of Contents
