Storage Featureser - Electrolux EQE6879A User Manual

7. STORAGE FEATURESER

CAUTION
To avoid personal injury or property d
amage, handle tempered glass shelves
carefully. Shelves may break suddenly if
nicked, scratched or exposed to sudde
n temperature change. Allow the glass
shelves to stabilize to room temperature
before cleaning. Do not wash in
dishwasher.
You can easily adjust shelf positions in the
fresh food compartments to suit your needs.
The shelves have mounting brackets that
attach to slotted supports at the rear of each
compartment.
To change a shelf position:
1. Remove all food from shelf.
2. Lift the front edge up and pull the shelf out.
3. Replace by inserting the mounting bracket
hooks into the desired support slots.
4. Lower the shelf and lock into position.
To adjust the flip shelf:
1. Remove food from shelf.
2. Lift the right side edge of shelf upwards and
push to the left towards ice maker
To adjust the slide-under/flip shelf:
1. Pull front half shelf forward until its back
drops down, then gently push front half shelf
back and under back half shelf.
Flip Shelf
Slide-Under/Flip Shelf
2. With front half fully below back half, lift front
of shelf to flip it upwards toward the back of
the cabinet.
Slide-Under/Flip Shelf
Drawers
Your refrigerator includes a variety of storage
drawers.
FreshSeal Crisper (with automatic humidity
TM
control)
Crisper drawers are designed for storing
fruits, vegetables, and other fresh produce.
Crispers have an auto humidity control (with
replaceable membrane) on the side of each
crisper under the humidity control cover.
To remove the auto humidity control
membrane:
1. Reach to back of humidity control cover.
2. Pull up on cover.
3. Pull cover towards back of cabinet and
remove.
4. Replace humidity membrane.
5. Replace cover by reversing the steps above.
Repeat for both crispers.
Opening the Crisper Drawer
ENGLISH 15