Connecting the power supply cord
Plug the power cord into the back of the Business Policy
1
Switch.
Connect the other end of the power cord to a power outlet.
2
3
The switch and the DC-DC converter module should now be
functioning normally. Check that the RPSU LED on the front
of the Business Policy Switch is lit green.
The Business Policy Switch does not have a power on/off switch.
When you connect the AC power cord to a suitable AC power
outlet, the switch powers up immediately.
Warning:
turn off power to this device. The power cord must
always be connected in a location that can be accessed
quickly and safely in case of an emergency.
Removal of the power cord is the only way to
17
9846EB