Table of Contents
Advertisement
2. Prescribed use
The 2-channel PIR motion detector 'FS20 PIRI-2' is a component of the FS20 wireless control
system. It can control up to 2 radio receivers in the FS20 system with separately adjustable
criteria.
The PIR motion detector registers infrared radiation (heat) of moving people and warm-
blooded animals (for the latter, a minimum size is required to trigger the PIR motion detector).
Batteries must be used to power the device.
Make sure that the product does not get damp or wet. The product is only suitable for use in
dry indoor areas.
Any use other than the one described above may damage the product and can also increase
the risk of short-circuit, fire, electric shock, etc.
No part of the product may be modified or adapted. The device may only be operated when
its casing is fully closed.
All the safety instructions and installation notes in this manual must be
observed without fail.
3. Scope of delivery
• PIR motion detector 'FS20 PIRI-2' with installation bracket
• User manual
5
Advertisement
Table of Contents
