Halsey Taylor HTVEE-MVP Series Owner's Manual page 5

HTV8EEMVP*1B HTV8EEMVP*2B HTV8EEMVP*3B HTVDEEMVP*1B
FIG. 7
12
59
FIG. 8
1
30
Removing the basin
To remove the basin (Item 12), remove two screws (Item 49) on top of the basin
(Shown in Fig. 7). Then remove the four screws (Item 59) located underneath the
dispenser bottom (Item 41) as shown in Fig. 7. Finally pull polytube (Item 30) out of
bubbler nipple (Item 38) as shown in Fig. 8. and remove the basin.
49
29
38
See figure below for
Operation of Quick
Connect Fittings
FIG. 9
Filter Installation Detail
(Some parts hidden for clarity)
PAGE 5
49
39, 54
40
98412C (Rev. C - 11/08)