Table of Contents
Advertisement
3.
Installation
3.1
Before Installation
3.1.1
Safety Check
•
Check for transport damages.
•
Before connecting the product to the power supply, check that the power
supply voltage and current rating corresponds with the power supply details
shown on the product rating label.
CAUTION: Disconnect the power supply before installing or
repairing the charge point. Failure to do so may result in physical
injury or damage to the power supply system and the charge
point.
CAUTION: Avoid touching or pressing the OLED screen all times,
as this may result in damage to the OLED screen.
DANGER: RISK OF SUFFOCATION
Keep any packing materials away from children – these materials
are a potential source of danger, e.g. suffocation.
CAUTION: Cord extension sets are not allowed to be used.
The charge point must be installed only by a licensed electrician in accordance
with the provisions of the local electrical industry construction and should comply
with national electrical codes and standards.
Before installing the charge point, make sure you have read all of these
instructions in this manual and fully understand its contents.
Appropriate protection is required when connecting to a main switchboard. The
tools and parts used as outlined in the section "Tools & parts required for
installation".
© NovaCHARGE 2022 - All Rights Reserved
Rev 11/2022
7
Advertisement
Table of Contents
