Table of Contents
Advertisement
NC8000 Series 80A Installation Manual
3.4.1
Electrical wiring to the NC8000.
1.
Fold the wire end to pass through the conduit and insert them into the
input hole (choose input direction and open cap).
2.
Fasten the copper wire on the corresponding terminal block. The wiring
instruction is printed in front of the terminal block (L1/L2/G).
© NovaCHARGE 2022 - All Rights Reserved
Table 3-6 Cable input position
Table 3-7 Input wiring position
14
Advertisement
Table of Contents
