Page 2
1 DATECS InfineaX User manual THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD. VERSION: March 2016...
1 DATECS InfineaX User manual Legal Notice “Made for iPod” and “Made for iPhone” mean that an electronic accesory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.
Page 4
5/iPod Touch functionality, to reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones or other similar accessories. Carry the Infinea X at least 5mm away from your body to ensure exposure levels remain at or below the as-tested levels.
1 DATECS InfineaX User manual Weight, g 200 with battery and 2D barcode reader (without iPod/iPhone) Dimensions (LxWxH), 148 x 72 x 31 Operating: -10 o C to +40 o C / 5% to 90% RH • Environmental Storage: -20 o C to +50 o C / 5% to 90% RH •...
1 DATECS InfineaX User manual 3. General View Front Speaker Mounting torx screws (1) Home button Microphone...
Page 9
1 DATECS InfineaX User manual Rear Speaker RF reader Battery Pads for charging Scan engine station and sync On/Off button...
Page 10
1 DATECS InfineaX User manual Volume LEDs buttons indications Battery status button LEDs mini USB indications connector Button for Scan button switching between Rear/Front speakers...
Pic. 7 4.3 Battery charging and status level This device can be charge from USB port or Datecs charging station. Connect mini USB cable to USB port and charge will start. When the device is charging one green LED is light (Pic.8).
1 DATECS InfineaX User manual Battery level status can be check, when is press battery status button: - Battery percentage above 75% – LEDs flash on green - Battery percentage between 50-75% – LEDs blinks on green - Battery percentage between 25-50% – LEDs blinks on orange - Battery percentage between 10-25% –...
1 DATECS InfineaX User manual 4.6 Clearing Bluetooth pairing info - Hold on same time status and rear speaker button until the device is beep twice, if after that the devices is still not showing on iOS device available for connecting press on same “battery status”...
1 DATECS InfineaX User manual 4.13 RF card reading Start the app and select tab “RF”. Place the card on the spot with RF symbol (back side on barcode cover).