Getting Started ............................9 Buttons overview ........................... 10 Front side view ..........................10 Back side view ..........................11 Linea Pro 5 versions for iPod5 and iPhone5 ..................11 Attaching device ............................ 12 Operation modes ........................... 14 Charging Battery ............................ 15 Battery status level of the Linea Pro 5 .....................
1 DATECS Linea Pro 5 User manual Legal Notice “Made for iPod” and “Made for iPhone” mean that an electronic accesory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.
Page 4
1 DATECS Linea Pro 5 User manual FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Linea Pro 5 with 3-Track mag-stripe reader Linea Pro 5 with Secure Encrypting MSR Linea Pro 5 EMSR Module Linea Pro 5 with 3-Track mag-stripe reader and Linea Pro 5 MSR 1D/2D 1D/2D barcode scanner Linea Pro 5 with with Secure Encrypting MSR...
User manual Overview Linea Pro 5 allows mobile workers to convert their iPhone 5 / iPod 5 handset into a powerful point-of-sale solution. The Linea Pro 5 includes optional 1D or 2D barcode scanner, 3-tracks magnetic stripe reader, RFID reader and a rechargeable battery extender in a very compact and durable protective case.
1 DATECS Linea Pro 5 User manual Technical Data Processor 32-bit ARM Cortex - M3 based Microcontroller • Magnetic Card Reader 3-track bi-directional reading • (option) ISO 7810, 7811 and 7813 • PCI PTS 3.x certified Secure Magnetic Card Reader •...
1 DATECS Linea Pro 5 User manual Box Contents Your Linea Pro 5 comes with the following items listed below: Item Part Number Descriptions Image Linea Pro 5 Linea Pro 5 / Scanner USB A to mini USB B USB Sync cable...
The Linea Pro 5 allows you to scan barcode and capture Magnetic Strip information onto your iPod 5 or iPhone 5. Before using your Linea Pro 5 the battery should be properly charged. The following Quick Start guide will help to get your Linea Pro 5 ready for use.
10-pin mini USB connector Openings for Speaker and Bottom microphone Status LEDs and Status Button Aperture for Headset Jack Charging Lamellas Back side view Magnetic stripe reader Scan Button Scan engine On/Off Linea Pro 5 versions for iPod5 and iPhone5...
1 DATECS Linea Pro 5 User manual Linea Pro 5 for iPhone 5 (Aperture for Ring/Silent switch) Linea Pro 5 for iPod 5 Attaching device Step 1 – Remove the “back cover”...
Page 13
1 DATECS Linea Pro 5 User manual Step 2 – Slide the iPod 5 or iPhone 5 into Linea Pro 5. (Please, before attaching the device, check the compatibility version of the Linea Pro 5 - for iPod 5 or iPhone 5 (page 10), and then connect it with the correct Linea Pro 5).
Operation modes Active mode - While iPod 5 or iPhone 5 is inserted. While the Linea Pro 5 application is active. Sleep mode - While iPod 5 or iPhone 5 is removed (after ~10sec). When iPod 5 or iPhone 5 On/Off button is pressed (after ~10sec).
Before first use, the battery pack should be charged for at least (4) hours. Linea Pro 5 can be charged via USB port or DATECS Power Station. When the Linea Pro 5 charging is started, automatically starts the charging of the inserted inside the cradle iPod 5 or iPhone 5.
1 DATECS Linea Pro 5 User manual Battery status level of the Linea Pro 5 LED1 is lighting – battery level is under or equal to 3,6V. LED1 and LED2 are lighting – battery level is between 3,6V and 3,7V.
User manual Barcode Scanning Using the 1D barcode scanner: The Linea Pro 5 1D uses a scan engine that supports one-dimensional (1D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Scanning 1D Barcodes: To scan a 1D barcode, first activate the scanner.
1 DATECS Linea Pro 5 User manual Using the 2D barcode scanner: The Linea Pro 5 2D uses a scan engines that supports one-dimensional (1D) and two-dimensional (2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size.
User manual Magnetic Card Reading Reading Magnetic Stripes: The Linea Pro 5 has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field data from all three tracks.
1 DATECS Linea Pro 5 User manual Contactless Card Reading In order to use the RFID card reading function, special software must be used. Please contact your distributor in order to get the latest demo application and SDK. Place the card on the shown spot and press the reading RFID card button on the application.