After 24 Hours; Operation - BAC VX Series Operation & Maintenance Manual

WARNING: Do not perform any
service on or near the fans,
motors, and drives, or inside the
unit without first ensuring
that the fans and the pumps are
disconnected and locked out.
M A R 1 1 3 - 0
4
W W W . B A L T I M O R E A I R C O I L . C O M . A U

After 24 Hours

After 24 hours of operating under load, the following services should
be performed.
1. Check the unit for any unusual noise or vibration.
2. Check the operating water level in the cold water sump. Adjust the
make up float valve if necessary.
3. Readjust the belt tension.
4. Inspect spray nozzles and heat transfer section.

Operation

During operation, the unit should be inspected, cleaned, and
lubricated on a regular basis, as per the 'Recommended Maintenance
Service Table' in this bulletin.