Halsey Taylor HTVEE-MVP Series Owner's Manual page 6

Barrier-free water coolers

Hide thumbs Also See for HTVEE-MVP Series:

HTV8EEMVP*1D

SENSOR RANGE ADJUSTMENT: (A)

The electronic sensor used in this cooler is factory pre-set for a "visual" range of 36 inches (914 mm). If

actual range varies greatly from this or a different setting is desired, follow the range adjustment procedure

below:

- Using a small tip screwdriver, locate range adjustment screw through the

small hole between the sensor lenses

increase range and counterclockwise to decrease range.

CAUTION: Complete range of sensor (24-46 inches/610-1168mm) is only one turn of the adjusting screw.

SENSOR CONTROL: If sensor fails to operate valve mechanism or operates erratically, check the following.

A. Ensure there are no obstructions within a 40 inch (1016mm) radius in front

of cooler.

B. Check wire connections at the solenoid valve and sensor.

CAUTION: Make sure unit is unplugged before checking any wiring.

C. Ensure proper operation of solenoid valve. If there is an audible clicking

sound yet no water flows,look for an obstruction in the valve itself or

elsewhere in the water supply line.

FIG. 10

98600C (Rev. B - 10/10)

HTV8EEMVP*2D

(A)

. Turn this screw clockwise to

24 or 25

Green

Red

Yellow

(A)

PAGE 6

HTV8EEMVP*3D

HTVDEEMVP*1D