2021/07/13 22:44:19 (GMT+09:00)
SOFTWARE UPDATE
1. Preparation
・Connect the PC to the set with USB cable.
(Supplements)
・There is no problem with HDMI cable connected.
・Use the USB cable that can transfer data.
・Prepare the following:
・Firmware:SHE_PCBA_vx.xx.xx_Encrypt.bin
・Update tool: SHE_RTD_TTS_Download_v0_11.zip
・USB Driver(not required depending on PC):CDM21228_Setup.exe
2. Procedure
1. Extract SHE_RTD_TTS_Download_v0_11.zip and launch SHE_RTD_TTS_Download.exe.
2. Click "RTD Flash".
3. Select "SHE_PCBA_vx.xx.xx_Encrypt.bin" and click "Open".
4. Start "Update". It takes about one minute to complete "Update".
If "FIRM Upgrade Success" is displayed, "Update" is complete. After "Update", the set will restart.
Make sure that the software version on the menu of the set has changed.
If the USB cable is accidentally unplugged or the set is turned off during Update, Update will fail.
The screen is not displayed on the set, it is not a failure.
Perform the software update again from the step 1.
ELF-SR1
14
SYS SET