Prosense PPS‐RCO Quick Installation Guide
General Specification
PPS‐RCO Series Detector Electrical Specifications:
Input Voltage Range
Max Power Consumption 0.96 Watts at 16VDC ‐ normal condition
Terminals
Relays
Communication
Sensor
Detector Body Specifications:
Material
Weight
Mounting
Entries
Environmental:
IP Rating
Operating Temperature
Operating Humidity
Operating Pressure
Storage Conditions
PRS‐QIG‐PQ‐EN‐Rev.01‐11.2018
12 to 20VDC (16VDC nominal)
1.60 Watts at 16VDC ‐ alarm and fault condition
4 x 2 x screw terminals suitable for wire diameter 1.5mm2 to 2.5mm2
3 x (1A 30VDC, 0.5A 125VAC, 0.3A 80VDC).
Non‐selectable: normally open and de‐energized
RS485, Modbus RTU
Electrochemical
Table 2: PPS‐RCO Series detectors electrical specifications
Plastic (black)
Plastic buat: 230g (with Sensor Header)
Wall mounting
PG11
Table 3: Detector body specifications
IP54 (plastic buat)
‐10ºC to +50ºC / 14ºF to +120ºF
Continuous 20‐90%RH (non condensing)
90‐110kPa
‐10°C to +50°C (14°F to +120°F)
Table 4: Environmental specifications