General Warnings - Riello RS 28/M Installation, Use And Maintenance Instructions

1

General warnings

1.1 Guarantee and responsibility
The rights to the guarantee and the responsibility will no longer be
valid in the event of damage to things or injury to people, if such
damage/injury was due to any of the following causes:
 intervention of unqualified personnel;
 carrying out of unauthorised modifications on the equipment;
 powering of the burner with unsuitable fuels;
 faults in the fuel supply system;
 repairs and/or overhauls incorrectly carried out;
 use of non-original components, including spare parts, kits,
accessories and optional;
 force majeure.
The manufacturer furthermore declines any and every responsibil-
ity for the failure to observe the contents of this manual.
1.2 Installation safety notes
It is obligatory to carry out all installation, mainte-
nance and dismantling operations with the electric-
ity supply disconnected.
DANGER
Isolate the fuel supply.
DANGER
The installation must be carried out by qualified per-
sonnel, as indicated in this manual and in compli-
ance with the standards and legal requisites in
force.
WARNING
General warnings
– Personnel must always use the personal protective equipment
envisaged by legislation and follow the indications given in this
manual.
– Personnel must observe all the danger and caution indications
shown on the machine.
– Personnel must not carry out, on their own initiative, operations
or interventions that are not within their province.
– Personnel must inform their superiors of every problem or dan-
gerous situation that may arise.
CAUTION
1 GB
After removing all the packaging, check the integrity
of the contents. If in doubt, do not use the spare
parts kit; contact the supplier.
Wait for the components in contact with heat sourc-
es to cool down completely.
After carrying out maintenance, cleaning or check-
ing operations, reassemble the cover and all the
safety and protection devices of the burner.
2915800