7. Control Panel
7.1
User interface
7.2
ON, OFF, Stand-By
7.3
Settings
7.4
Alarms
7.1 User interface
7.1.1 Control panel
The control panel enables all machine functions to be performed, to display its operation and any
alarms which may be triggered.
7.1.2 Display
From the display of the control panel it is possible to see the sizes of the values set and machine
operation may be displayed through the LEDs.
Values
A space of four digits can be seen on the display, from which you may read the numerical values
and letters corresponding to the entries of the menu and to the triggered alarms.
Alarm LED
The ALARM LED indicates that an alarm has been triggered.
On: triggered alarm.
Flashing: resettable alarm.
Heating LED
The HEATING LED indicates that the unit is operating in Heat Pump mode.
On: heat pump operation.
Flashing: remote heat pump operation.
Cooling LED
The COOLING LED indicates that the unit is operating in cooling only mode.
On: cooling only operation.
Flashing: remote cooling mode only.
Stand-by LED
The STAND-BY LED indicates that the unit is in Stand-By mode.
On: the unit is in Stand-By.
Flashing: the unit has been remotely placed in Stand-By.
Defrosting LED
DEFROSTING LED indicates that the unit is operating in defrosting mode.
Economy LED
The ECONOMY LED means that the economy function is on.
19