User Guide for the Wireless Boom Headset (HS-4W) 9311010 Issue 1...
Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. In some countries there may be restrictions in using Bluetooth devices. Check with your local authorities. 9311010 / Issue 1 © Copyright...
Placing the headset over the ear...15 Call functions...15 Answering and ending a call ...15 Automatic answer...16 Rejecting a call ...16 Redialling the last dialled number ...16 Muting an ongoing call...16 Voice dialling...16 Adjusting the earphone volume ...17 Copyright © 2004 Nokia. All rights reserved.
Switching the call between phone and headset ...17 Using the headset with several paired phones ...17 Resetting the headset ...18 4. Battery information...19 Charging and Discharging...19 Care and maintenance ...21 FCC Notice - Nokia Wireless Boom Headset HS-4W ...22 © Copyright 2004 Nokia. All rights reserved.
1. Introduction The Wireless Boom Headset HS-4W can be connected to a compatible phone that supports Bluetooth technology. This allows you freedom to make and receive calls while on the move or in the office. Read this user guide carefully before using the headset. In addition to this Wireless Boom Headset HS-4W user guide, read also the phone’s user guide,...
HS-4W and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the Wireless Boom Headset HS-4W and other Bluetooth-enabled products, please check with your dealer. I Bluetooth passcode You need a Bluetooth passcode for pairing the headset with a compatible phone.
I Overview The headset contains the following parts, as shown in Figure 1. 1 - Power key: Switches the headset on and off, or mutes the ongoing call. 2 - Speaker: Relays the caller’s voice. 3 - Indicator light: Displays the current status of the headset. The indicator light can be yellow, green or red.
I Chargers and batteries Check the model number of any charger before using it with this device. The Wireless Boom Headset HS-4W is intended for use with the following chargers: AC-1, ACP-7, ACP-8, ACP- 9, ACP-12, and LCH-12. Warning! Use only batteries and chargers approved by Nokia for use with this particular enhancement.
I Charging the battery 1. Connect the charger cable to the headset as shown in Figure 2. Before connecting the charger cable to the headset, open the flap. 2. Connect the charger to an AC wall outlet. The red indicator light is displayed during charging.
When the battery charge falls low Fully charged batteries last up to 6 hours of talk-time and up to 160 hours of standby time. (In standby mode the headset is switched on but no call is in progress.) When the battery is running out of power, the headset beeps. Charge the battery as described above.
Note that switching on the headset creates the connection automatically only if you have set the phone to accept Bluetooth connection requests without your permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu.
• Make sure that you have disconnected the previous Bluetooth connection from the phone. • Check that the headset is within 10 metres of the phone and that there are no obstructions, such as walls, or other electronic devices between the headset and the phone.
To switch off the headset, press and hold the power key for 2 seconds when no call is in progress. The headset beeps and the red indicator light is displayed briefly.
Slide the headset onto your ear as shown in Figure 3. I Call functions When the headset is connected to the phone, make a call by using the phone in the normal way. Note that the call functions depend on the phone that you use.
The phone plays the voice tag and dials the related phone number. You can also activate voice dialling with the phone. For details on voice dialling, see the phone’s user guide. Note that this function is only available if the phone supports voice dialling. © Copyright 2004 Nokia. All rights reserved.
You can switch an active call between the headset and a compatible device. To switch the call from the headset to a phone and vice versa, press and hold the answer/end key or use the respective function in your phone.
If you want to use the headset with a paired phone that is not a "default phone" or "last used phone", make the connection in the phone’s Bluetooth menu. I Resetting the headset You can reset the headset to its original settings, for example, to change the default user of the headset.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59° F and 77° F). A headset with a hot or cold battery may ©...
Batteries' performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire! Discard batteries according to local regulations (e.g. recycling). Do not dispose as household waste. © Copyright 2004 Nokia. All rights reserved.
• Do not use or store the headset in dusty, dirty areas. Its moving parts can be damaged. • Do not store the headset in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
FCC Notice - Nokia Wireless Boom Headset HS-4W This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE: Modifications not expressly approved by Nokia could void the user's authority to operate the equipment. © Copyright 2004 Nokia. All rights reserved.