Display Indicators; Find Locations - Nokia N86 8MP User Manual

When you have an active data connection and
browse the map on the display, a new map is
automatically downloaded if you scroll to an area
not covered by the maps that have already been
downloaded. The maps are automatically saved in
the device memory or on a compatible memory
card, if inserted.
To zoom in and out on the map, press * and #.
To change the map type, select
mode.

Display indicators

The GPS indicator
of the satellite signals. One bar is one satellite.
When the device tries to find satellite signals, the
bar is yellow. When the device receives enough data
from the satellites for GPS to calculate your location,
the bar turns green. The more green bars, the more
reliable the location calculation.
Initially, your device must receive signals from at
least four satellites to calculate your location. After
the initial calculation, signals from three satellites
may be enough.
The data transfer indicator
internet connection used, and the amount of data
transferred since the application started.
86
Options Map
>
shows the availability
shows the

Find locations

To search for locations, press the scroll key and
select Explore. Start entering the location name in
the search field. The device suggests matching
nearby locations. Select the location from the list,
or enter the location name in the search field, and
select Search.
1. To find a specific address, select
Address search.
2. Start entering the required information. The
fields marked with an asterisk (*) are
mandatory.
3. Select the address from the list of suggested
matches.
4. Select Options > Search.
To find an address saved in the contacts list, select
Options Address search
>
from Contacts.
To search for locations by their coordinates, select
Options Address search
>
by coordinates. To select the coordinate format,
scroll up or down.
To search for locations in specific categories, such
as restaurants or shopping, press the scroll key, and
select Explore. Select a category, and enter the
search terms in the search field.
Options
>
Options Select
> >
Options Search
> >