Energy Saving Tips; Changing The Light - Element ERT14CSCW User Manual

NOTE
This refrigerator needs to be installed
independently and cannot be used as a
built-in. Otherwise, it will cause problems
such as failure to install into the cabinet,
the performance and life of the product
are reduced. And the manufacturer does
not provide basic product warranty.
2.2 ENERGY SAVING
TIPS
•
The appliance should be located
in the coolest area of the room,
away from heat producing
appliances or heating ducts, and
out of direct sunlight.
•
Let hot food cool down to
room temperature before
placing it in the appliance.
Overloading the appliance
forces the compressor to run
longer. Food that freezes too
slow may lose its quality, or spoil.
•
Be sure to wrap food properly,
and wipe containers dry before
placing them in the appliance.
This cuts down on frost build-up
inside the appliance.
•
Appliance storage bins should
not be lined with tin foil, wax
paper, or paper toweling.
Liners interfere with the cold
air circulation, making the
•
Organize and label food to
reduce door openings and
extended searches. Remove as
many items as needed at one
time, and close the door as soon
as possible.
2.3 CHANGING THE
LIGHT
•
Any replacement or
maintenance of the LED lights
is intended to be made by the
manufacturer, service agents
or another qualified person.
The light source in this product is
only to be replaced by qualified
engineers.
1. Remove the plug.
2. Remove the light cover with a
screwdriver.
3. Take down the light panel.
4. Remove the connection terminal.
12