Table of Contents
Advertisement
Available languages
Available languages
T e l e p h o n e
Join a channel
To join a channel, select
Options
hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn
to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the
entire time you are talking. When you have finished talking, release the key.
To switch between channels during multiple calls, select Swap. The active channel is highlighted.
To view the currently active participants in the channel, select
To invite a participant to a channel, select
Push to talk log
To open the push to talk log, select
to talk calls.
Tip: To initiate a one-to-one call from
Exit push to talk
Select
Options
> Exit. Select
background.
Net calls
With the net call service (network service), you can make and receive calls over the internet.
Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular
networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your
net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if
possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make
calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the
availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call
provider to check the internet telephony emergency call capability.
VoIP (voice over internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the
internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a
traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
The availability of the net call service may vary according to your country or sales area.
Define the net call settings
Before you can make net calls, you need to define the net call settings. After you have defined the net call settings with these
instructions, your device logs in to the net call service automatically when you select
First: define a SIP profile
1. Select
Menu
Tools
>
See "Edit SIP profiles," p. 82.
Contact your net call provider for the correct information.
2. Select
Proxy
server, and set
3. Select
Back
until you return to the
Second: define a net call profile
1. Select
Internet tel. settings
2. Select
Back
until you return to the main menu.
Third: select a preferred net call profile (optional)
If you select a preferred net call profile,
1. Select
Menu
Connect.
>
2. Select
Preferred profile
3. Select
Back
until you return to the main menu.
Tip: You can also use manual login to the net call service. Use the same settings instructions as with automatic login,
but ensure that
need to manually select the network used in the net call service.
© 2007 Nokia. All rights reserved.
PTT
channels. Select the channel you want to talk to, and press the voice key. Remember to
>
Options
Options
PTT
>
PTT
Yes
to log out and close the service. Press
Settings
Connection
>
>
You must define all available SIP settings, but ensure that
Transport type
to Auto.
Connection
menu.
Options
New
profile. Enter a name for the profile, and select the SIP profile you just created.
>
>
Internet tel.
Internet
tel..
>
and the net call profile you just created.
Registration
is set to
When needed
Options
Active
>
Send
invitation.
>
log. The log shows the date, time, duration, and other details of your push
log, select the desired log event and press the voice key.
No
if you want to keep the application active on the
SIP settings
Options
>
>
automatically uses this network profile to connect to the net call service.
and
Transport type
39
members.
Menu
Connect.
>
Add
new, and enter the required information.
>
Registration
is set to
UDP
or TCP. With manual login, you
Internet
tel..
>
is set to
Always
on.
Advertisement
Chapters
Table of Contents
