TERASAKI TemBreak PRO T2MS4 Instruction Manual

2
TemBreak
The slide mechanical interlock device allows only one breaker to be closed at one time.
Please read these Instructions carefully to ensure correct use of the Device. The
Manufacturer assumes no responsibility for damages resulting from non-application
or incorrect application of the instructions provided herein.
This manual is to be delivered to the user after completion of the installation work.
*The contents of this manual may be subject to change without notice.
2G0457SAE KRB-0405e
4
ON
Slide Mechanical
Interlock Device
Instruction Manual
(Types): T2MS40
6-13-47 Kamihigashi, Hiranoku, Osaka
547-0002, Japan
TEL +81-6-6791-2763
FAX +81-6-6791-2732
http://www.terasaki.co.jp
int-sales@terasaki.co.jp
OFF
ON
1
1
Connections Poles
Interlock type
T2MS403SF FC, RC
T2MS403SP PMB
T2MS403SC PMC
T2MS404SF FC, RC
T2MS404SP PMB
T2MS403LF FC, RC
T2MS403LP PMB
T2MS403LC PMC
T2MS404LF FC, RC
T2MS404LP PMB
1: FC= Front connected, RC=

Packaged Items

2
Mechanical Interlock Device

Assembly tools

3

Safety Notice

4
Be sure to read these Instructions and other associated documents accompanying the product
thoroughly to be familiarize yourself with the product handling, safety information, and all other
precautions before mounting, using, servicing, or inspecting the product In these Instructions,
safety notices are divided into
Warning and
Warning : A warning notice with this symbol indicates that neglecting the suggested procedure
or practice could result in lethal or serious personal injury.
Caution : A caution notice with this symbol indicates that neglecting the suggested procedure or
practice could result in moderate or slight personal injury and/or property damage.
Note that failing to observe Caution notices could result in serious injury/damage in some situations.
Because safety notices contain important information, be sure to read and observe them.
Operation Precautions
Never touch live terminals. Doing so may result in electric shock.
Installation Precautions
Installation work must be performed by competent persons.
Prior to commencing any work on the product, open an upstream circuit breaker or the
like to isolate all sources of power/voltage. Doing so may result in electric shock.
Operation Precautions
When the breaker trips open automatically, remove the cause; then close the breaker.
Otherwise, a fire may result.
Do not apply excessive force to the interlock Lever. Otherwise, damage may occur.
Do not attempt to force an interlocked breaker into the closed position. Otherwise,
damage may occur.
When using the toggle extension, mount as the lock pin is on the left-side of the left-side
breaker and on the right-side of the right-side breaker.

Applicable Breaker Types/ Packaged Items

Applicable breaker type
E400- , S400- ,
3
, ZAS400- , ZAS400-
ZAE400-
NE400- , NS400- , ZE400-
ZS400- , ZNE400- , ZNS400-
4
E630- , S630-
3
H400- , L400- , B400
4
Rear connected, PM*=
Pan Head Screws
M6 16 2pcs. (FC,RC,PMC)
M5 14 2pcs. (PMB)
Caution according to the hazard level:
Warning
Caution
lock pin
,
,
,
Plug-in