Wlan Security Settings; Wep Security Settings; Wep Key Settings - Nokia E63 User Manual

To edit the settings manually, select
configuration > Disabled, and define the following:
Long retry limit — Enter the maximum number of
•
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
Short retry limit — Enter the maximum number of
•
transmission attempts if the device does not receive
a clear-to-send signal from the network.
RTS threshold — Select the data packet size at
•
which the WLAN access point device issues a request
to send before sending the packet.
TX power level — Select the power level of your
•
device when sending data.
Radio measurements
•
radio measurements.
Power saving — Select whether to use the WLAN
•
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options Restore defaults.
>

WLAN security settings

Select Menu Tools
> >
Access points Options
>
select an access point and
In the access point settings, select
mode and the desired mode.
Automatic
— Enable or disable the
Settings Connection
>
New access point, or
>
Options > Edit.
WLAN security

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When the WEP security mode is in
use, and your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings
WEP key in use
•
Authentication type
•

WEP key settings

•
key.
WEP key settings
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings
and from the following:
WEP encryption
•
encryption key length.
>
WEP key format
•
enter the WEP key data in
format.
WEP key — Enter the WEP key data.
•
and from the following:
— Select the desired WEP key.
— Select Open or Shared.
— Edit the settings for the WEP
WEP key settings
>
— Select the desired WEP
— Select whether you want to
ASCII or Hexadecimal
127