Nokia E63 User Manual page 107

The WLAN wizard helps you find and connect to a
wireless LAN. When you open the application, your
device starts to scan for available WLANs and lists them.
To update the list of available WLANs, select
Refresh.
To mark up WLANs in the list of found networks, select
Filter WLAN networks. The selected networks are
filtered out the next time the application searches for
wireless LANs.
To start or continue browsing the web using the access
point of the WLAN, scroll to the desired network, and
select Options Start web browsing
>
browsing.
To disconnect the active connection to the WLAN, select
Options Disconnect WLAN.
>
To view the details of the WLAN, select
Details.
To save the access point of the WLAN, select
Define access point.
Always enable one of the available encryption methods
to increase the security of your WLAN connection. Using
encryption reduces the risk of unauthorised access to
your data.
Use the wizard on the home screen
On the home screen, the WLAN wizard shows the status
of your WLAN connections and network searches. To
view the available options, scroll to the row showing
the status, and press the scroll key. Depending on the
status, you can start the web browser using a WLAN
connection, connect to your net call service, disconnect
from a WLAN, search for WLANs, or set the network
scanning on or off.
If WLAN scanning is off and you are not connected to
Options any WLAN,
>
home screen. To set scanning on and search for
available WLANs, scroll to the row showing the status,
and press the scroll key.
To start a search for
available WLANs,
scroll to the row
showing the status,
press the scroll key,
or Cont.web
and select
for WLAN. To set
WLAN scanning off,
scroll to the row
showing the status,
Options
>
press the scroll key,
and select
Options
>
When
WLAN wizard automatically creates an access point for
the selected WLAN. The access point can also be used
with other applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter
the relevant passcodes. To connect to a hidden
network, you must enter the correct service set
identifier (SSID).
To use the found WLAN for a net call connection, scroll
to the row showing the status, and press the scroll key.
Select
WLAN to be used.
WLAN scanning off
Search
Switch WLAN scan off.
Start web browsing or
Use for, the desired net call service, and the
is displayed on the
Use for is selected, the
107