Remote Configuration - Nokia E63 User Manual

To back up information from the device memory to a
memory card, select
Options Back up phone
>
To restore information from the memory card to the
device memory, select
Options Restore from
>
You can also connect your device to a compatible
computer and use Nokia PC Suite to back up data.

Remote configuration

Select Menu Tools
>
With Device manager, you can manage settings, data,
and software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started
by the server when the device settings need to be
updated.
To create a new server profile, select
server profile.
You may receive these settings from your service
provider in a configuration message. If not, define the
following:
114
Menu Tools Memory
> >
memory.
Menu Tools Memory
> >
card.
Device mgr..
>
Options
Server name
•
server.
>
Server ID
•
configuration server.
Server password
•
>
your device to the server.
Session mode
•
type.
Access point
•
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection. This setting is
available only if you have selected
bearer type.
Host address
•
configuration server.
Port — Enter the port number of the server.
•
User name
•
configuration server.
Password
•
configuration server.
Allow configuration
•
server to initiate a configuration session.
Auto-accept all requests
•
not want the server to ask for your confirmation
when it initiates a configuration session.
Network authentication
•
http authentication.
New Network user name
•
>
http authentication. This setting is available only if
you have selected
used.
Network password
•
http authentication. This setting is available only if
— Enter a name for the configuration
— Enter the unique ID to identify the
— Enter a password to identify
— Select the preferred connection
— Select the access point to use for
Internet
— Enter the web address of the
— Enter your user ID for the
— Enter your password for the
— Select Yes
— Select
— Select whether to use
— Enter your user ID for the
Network authentication
— Enter your password for the
as the
to allow the
Yes if you do
to be