Data Call Configuration; Vpn; Vpn Access Points; Vpn Access Point Configuration - Nokia E62 User Manual

S e t t i n g s
Allow loose routing — Select if loose routing is allowed.
•
Transport type — Select
•
Port — Enter the port number of the proxy server.
•
Select Menu Settings
> >
Select from the following settings:
Registrar serv. addr. — Enter the host name or IP address of the registrar server in use.
•
Realm — Enter the registrar server realm.
•
User name and Password
•
Transport type — Select
•
Port — Enter the port number of the registrar server.
•

Data call configuration

Select Menu Settings
> >
To set the time-out period after which data calls automatically end if no data has been transferred, select
User defined to enter the time yourself or

VPN

VPN access points

To manage VPN access points, select
Edit — Edit the selected access point. If the access point is in use or its settings are protected, you cannot edit it.
•
New access point — Create a new VPN access point.
•
Delete — Delete the selected access point.
•

VPN access point configuration

Contact your service provider for the correct access point settings.
To edit VPN access point settings, select the access point and Options.
Select from the following settings:
Connection name — Enter a name for the VPN connection. The maximum length of the name is 30 characters.
•
VPN policy — Select a VPN policy to be used with this access point.
•
Internet access pt. — Select the Internet access point to be used with this VPN access point.
•
Proxy serv. address — Enter the proxy server address of this VPN access point.
•
Proxy port number — Enter the number of the proxy port.
•

Configurations

To view and delete configurations for trusted servers, select
You can receive messages from your network operator, service provider, or company information management that contain
configuration settings for trusted servers. These settings are automatically saved in Configs.. You may receive configuration
settings for access points, multimedia or e-mail services, and IM or synchronization settings from trusted servers.
To delete configurations for a trusted server, select the server, and press the backspace key. The configuration settings for other
applications provided by this server are also deleted.

Date and time configuration

See "Clock," p. 49.

Security configuration

See "Define security settings," p. 80.

Enhancement configuration

Select Menu Settings
> >
Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset
where it can endanger your safety.
With most enhancements, you can select from the following settings:
Default profile — Select the profile that is activated when you attach an enhancement to your device.
•
Automatic answer — Let the device answer phone calls automatically when an enhancement is attached. Select
•
the device answer an incoming call automatically after 5 seconds. If the ringing type is set to
menu, automatic answer is disabled.
Copyright © 2006 Nokia. All Rights Reserved.
UDP or TCP.
Config. Connection SIP settings
> >
— Enter your user name and password for the registrar server.
UDP or TCP.
Config. Connection Data
> >
Unlimited
VPN VPN access points
>
Config. > Enhancement.
Options Add new
> >
call.
to keep the connection active until you select
Options and from the following settings:
>
Menu Settings
>
32
or Edit Registrar server.
>
Options
Config. Connection > Configs..
> >
Beep once
Online time. Select
> Disconnect.
On to have
or Silent in the Profiles