Positioning Methods - Nokia E5 User Manual

To set the keypad to lock automatically
after a defined period, select
and SIM card
>
period.
To set a time-out period after which the
device is automatically locked and can
be used only if the correct lock code is
entered, select Phone and SIM card
Phone autolock
length of the time-out period in
minutes, or select
the autolock feature. When the device is
locked, you can still answer incoming
calls, and calls may still be possible to
the official emergency number
programmed into your device.
To change the lock code, select
and SIM card
>
lock code is 12345. Enter the current
code and then the new code twice. The
new code must be 4-255 characters
long. Alphanumeric (uppercase and
lowercase) characters can be used. The
device notifies you if the lock code is not
properly formatted.
Restore original settings
To restore the original device settings,
select Menu Ctrl. panel
>
© 2010 Nokia. All rights reserved.
Phone
Keypad autolock
period. Enter the
None to deactiveate
Phone
Lock code. The default
Settings
>
and General
this, you need your device lock code.
After resetting, the device may take a
longer time to switch on. Documents,
contact information, calendar entries,
and files are unaffected.
Positioning settings
>
Select Menu
and General
To use a specific positioning method to
detect the location of your device, select
Positioning
To select a positioning server, select
Positioning
To select which measurement system
you want to use for speeds and
distances, select
preferences
To define in which format the
coordinate information is displayed in
your device, select
preferences
Settings 155
Factory settings. To do
>
Ctrl. panel Settings
> >
> Positioning.
methods.
server.
Notation
Measurement
>
Notation
Coordinate format.
>
system.