Prioritise A Channel In A Scan List; Set Priority Channels - Motorola Commercial CM160 User Manual

PRIORITIZE A CHANNEL IN A SCAN LIST
You may want to check the activity on one or two
channels more frequently than others. You can do
this by prioritizing them:
Priority Channel Scanning Sequence
None specified Ch1 Ch2 Ch3
Ch4 ...Ch1
Channel 2 Ch2 Ch1 Ch2 Ch3
(Priority 1)
Ch2 Ch4 Ch2 ...Ch1
Channel 2 Ch2 Ch1 Ch8 Ch3
(Priority 1) and
Ch2 Ch4 Ch8 ...Ch1
Channel 8
(Priority 2)
Note: If you are receiving on a non-priority channel and
traffic becomes active on a priority channel, your
radio will automatically switch to that priority
channel and indicate the activity with a short tone.

Set Priority Channels

Note: You cannot have the same priority on two different
channels.
D
1 to enter menu mode.
G H
PROG LST
2 or until
D
PROG LST
3 to select
English 28
G H
SCAN LST
4 or until
D
SCAN LST
5 to select
G H
EDIT PRI
6 or until
D
EDIT PRI
7 to select
G H
PRI #1
8 or until
PRI #2
– or – until
D
9 to select the current priority level.
You see the current priority channel.
G H
or
10 until you see the channel you want
to prioritize.
SELECTED
– or – until
to select the current
channel
DISABLED
– or – until
to de-prioritise the
current channel
D
11 to prioritize that channel.
SAVED
you see:
C
EDIT PRI
12 to return to
C
13 until you exit menu mode.