Edit Sip Profiles; Edit Sip Proxy Servers; Edit Registration Servers; Net Call Settings - Nokia E51 User Manual

To select the SIP profile you want to use by default for
communication sessions, select
profile.

Edit SIP profiles

Select Options > Edit, and select from the following:
Profile name
•
Service profile
•
Default access point
•
for the internet connection.
Public user name
•
from your service provider.
Use compression
•
Registration — Select the registration mode.
•
Use security — Select if security negotiation is used.
•
Proxy server — Enter the proxy server settings for this
•
SIP profile.
Registrar server
•
settings for this SIP profile.

Edit SIP proxy servers

Select Options
>
server.
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional security
and speed up access to the service.
Select from the following:
Proxy server address
•
118
address of the proxy server in use.
Options
>
— Enter a name for the SIP profile.
— Select IETF or Nokia
— Select the access point to use
— Enter your user name received
— Select if compression is used.
— Enter the registration server
New SIP profile or Edit
— Enter the host name or IP
Realm
•
Default
User name
•
password for the proxy server.
Allow loose routing
•
allowed.
Transport type
•
Port
•

Edit registration servers

3GPP.
Select Options
server.
Select from the following:
Registrar server address
•
address of the registrar server in use.
Realm
•
User name
•
password for the registrar server.
Transport type
•
Port
•

Net call settings

Proxy
>
Select Menu
Internet
To create a new net call profile, select
profile.
To edit an existing profile, select
— Enter the proxy server realm.
and Password — Enter your user name and
— Select if loose routing is
— Select UDP, Auto, or TCP.
— Enter the port number of the proxy server.
New SIP profile
>
— Enter the host name or IP
— Enter the registrar server realm.
and Password — Enter your user name and
— Select UDP, Auto, or TCP.
— Enter the port number of the registrar server.
Tools Settings
> >
tel..
or Edit Registrar
>
Connection
> >
Options New
>
Options > Edit.