Table of Contents
Advertisement
Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the drive(s) specified is not bootable.
Parameter
Bootup NumLock State
Fill Screen LOGO Show
Boot Option #1/#2/#3/#4
Network Device BBS
Priority
Hard Disk Drive Priority
Description
Enable or Disable Bootup NumLock function.
Enable/Disable showing the manufacturer's
logo during POST.
Press Enter to configure the
By default, the server searches for boot
devices in the following sequence:
1. UEFI device.
2. Hard drive.
3. Network device.
4. Removable device
Press Enter to configure the boot priority.
Press Enter to configure the boot priority.
64
Option
[On]
Off
[Enabled]
Disabled
boot priority.
Advertisement
Table of Contents
